Table of Contents
Most important, you do not need to buy two machines including harvesting machine and hot upskirt,thresher machine, and such a machine can save you cost and energy. This article is about the two types of rice harvesting machine.
Small Combined harvesting rice wheat machine, a machine to directly get crop kernels from the field, integrates harvesting, threshing, separating straws, removing impurities as a whole. In other words, this rice harvesting can cut the rice or wheat and then thresh them, and you can get clean kernels finally. Importantly, the breakage rate of kernels are only 1.5%, and the rice loss rate is 2%.,xxx-boob-sex
Technical parameter of Small combined harvester
|Starting mode||Electric starting|
|Engine Model||188 F|
|Diesel engine||Single cylinder,horizontal,evaporative water,direct injection|
|Rated power||13.5 Hp|
|Rated engine speed||3600 r/min|
|Fuel consumption||20 kg/hm2|
|Theoretical working speed||2.56 (second gear)|
|Rated cutting width||1200 mm|
|Min ground clearance||180 mm|
|Caterpillar||Length 800 *Width 250 mm|
The preoccupation of rice harvester
1. Rice harvester machine should go in field straightly, which can improve working efficiency and avoid crop wasting
2. User should control the speed of wheat harvesting machine according to the height, wetness of crop and the moisture of field. Speed down for high crops and speed up for dry fields.
Advantage of rice harvester
1.High threshing technology to ensure clean kernels and thorough separation.
2. Adopt to Three-in-one drum, low load, and low breakage rate.
3.Wider feeding port: raw material can be put into machine smoothly without any blockage.
4.Wider lift conveyor: make it easy to convey crops
5. Our combined rice harvesting machine has reasonable design, high reliability, easy maintenance, low cost.
- High threshing rate. The threshing rate is more than 95%.
- people can sit on the machine to operate, saving time and energy.
Self-propelled combined harvester also integrates walking, harvesting, cleaning and threshing as a whole, and is driven by the diesel engine. People can sit to work and it is very convenient for farmers. It has good maneuverability, easy movement, and high production efficiency. The crop will enter the drum to be threshed after harvesting, which saves labor time. High capacity and low loss rate are the biggest advantages of it.
|type:||Ride type (people can sit)|
|engine:||12.5Hp diesel engine|
the preoccupation of rice harvester
- Be sure to read the product manual carefully before use. The structure of the wheat harvester is complicated, although the quality of the machine is very good, and you still need to know the inner structure and follow the introduction to operate. Otherwise, the machine will be prone to failures.
sex-xxx-a,2. The conditions of harvested crop vary widely such as crop variety, maturity, moisture content, yield, crop height. Thus, the relevant mechanisms of the machine should be adjusted in time to ensure good performance.
best-hentai-manga,3. The protective device installed on the rice harvester is to protect the safety of the operator. Therefore, it cannot be disassembled when working. If it has been disassembled during maintenance, the user should install it again to avoid the accident.
bbw-nude-girls,4. The combine harvester should be inspected, maintained frequently such as checking whether lacking lubricating oil or water, looseness of the screw and abnormal sound, etc.
5. All the parts of wheat harvesting machine are designed to be coordinated and cannot be modified at will.
Advantage of rice harvester
Low breakage late.it is only 5% and you can get very intact and clean kernels,sex-in-night-club
2.High capacity. This combined harvester has a higher capacity(1000m³/h) compared with other harvesters,sexy-beauty-fuck
3.Cutting height is adjustable(12-75cm).,beg-sex
xvid-porn,4.Easy operation.only one person can finish all the processes.
desiremoviehd,5.Multiple functions. It can harvest the rice and wheat firstly and then thresh them to get kernels, which save time and energy.
Malfunction and related solution of rice harvester
|Cutter is blocked||1. Grass and mud on the cutter.||1. Stop and clear obstacles|
|2. The blade gap is too large.||2. Adjust the blade clearance.|
|3. the amount of crop is excessive.||3. reduce the harvesting width.|
|4. Damage to the blade.||4. Repair or replace.|
|The cutter heaps much crops||1. the crop is shorter than 55 cm||1. try to reduce the stubble height.|
|2. The cutter transporting rack is damaged.||2. Repair or replace|
|The threshing roller is blocked.||1. The feeding amount is excessive or uneven.||1. Control the cutter to cut crops evenly during operation.|
|2. The drum speed is low||2. Working with medium and large throttle|
|3. The stem is too wet, and the crop is too high||3. Choose dry crops to harvest and increase the stubble height.|
|4. The guide plate is detached or worn.||4. Repair or replace|
|The kernel outlet is blocked||1. The kernel outlet is full, and the kernel container is not changed in time.||1. Change the container in time.|
|2. The stem is wet, and the grain contains weeds.||2.Reduce the amount of feeding crops, and work with the medium and large throttle.|
|The crop head falls down the field.||Harvesting crop height exceeds 1.1 m.||Adjust the height of cutter. |
How to use rice harvester?
During the harvesting season, due to heavy tasks, rice harvester often encounters varieties of crops, fields with different sizes, and complex and varied natural conditions. In order to maximize the working efficiency, the operator not only should know the structural performance of the combined rice machine but also correctly master the using method and operating procedures.
- Preparation before use
On the basis of maintenance, you must carry some necessary tools and vulnerable parts. At the same time, you shall add enough fuel and lubrication oil.,coomeet,com
- Preparation and harvesting methods.
(1) You should know the condition of roads, soil depth, the height of crop, humidity in order to make appropriate adjustments to the wheat harvesting machine.,anissa-kate
sex-in-house,(2) When the harvester goes to the field, it should generally enter from the left corner. In order to avoid losses, the 1.2 m x 2.4 m open space should be cut manually in the right corner. If the field is not high, the rice harvester can work directly.
(3) If the terrain is relatively neat and is not high, in order to improve production efficiency, multiple fields can be connected to harvest.,soank-bang
Successful case of rice harvesting machine
At the beginning of June, we delivered 2 sets rice harvesting machine to Congo. This customer visited our factory to test the machine, and he felt very satisfied after testing. We sent him some vulnerable spare parts for free, since it is the first cooperation between us, and our company wants to build a long-time partnership with him. Our workers packed the machine carefully in the case of an accident during delivery. The following pictures are the packing pictures.,porn-india-.com
1. What is the cutting width of the two rice harvester machine?
120cm for two types of machine.
2. What is the cutting height?
3. What is the difference between both machines?
Type one is electric starting, and type two is ride type (people can sit).
4. What is the loss rate of both machine?
Type one: rice loss rate 2%
Wheat loss rate of 3.5%
Type two: less than 5%.
5. Can I get clean rice or wheat kernels by using this rice harvester machine?
Yes, the machine can cut rice or wheat and thresh them at the same time.
6. What is the raw material of this machine?
Just rice and wheat.
7. Are you the manufacturer?
Yes, we are. Welcome to visit our factory.
8. Can you change the machine voltage as our request?
Yes, we can.
9.How about your after-sales service?
Our engineer can go outside to install and train your workers to operate the full machine line.
10.Warranty time of your machine?