Table of Contents
Technical parameter of grass cutting
|Structure Type||Disk Type||Disk Type||Disk Type|
|Speed of Main Shaft||950r/min||950r/min||950r/min|
|Speed of feeding roller||360r/min||360r/min||360r/min|
|Feeding inlet Width||170mm||180mm||220mm|
The advantage of grass cutting
- Reasonable structure. The long outlet makes it convenient to discharge grass and three gears can control the length of the grass. In addition, shelf below the inlet can bear the weight of gasoline engine.
- Four wheels make it easy to move.
- Great working performance and light weight. The weight of machine is just about 90kg, but its capacity is 1.5t/h.
- Chopping size can be adjusted in accordance with your need, that is, 5mm,11mm,15mm.
- Crushing effect of grass cutter animal is very good, and the final output can be used to feed animals
- You can different models according to your needs。
- The blade inside machine is very sharp with long service life, and can fully cut the grass
- Grass cutting machine is easy to operate and only one person can finish all the process.
Working principle of grass cutting
- Firstly, place grass into the feeding hopper.
- There are three gears including long gear, medium gear and short gear, which can control the length of grass. 6 blades and the hammers completely cut and smash the grass at this time.
- After several seconds, grasses will be discharged from the outlet.
The preoccupation of grass cutting
- Remove hard objects such as wooden sticks, irons, stones, etc. In the grass cutter animal.
- Install the speed control gear according to the length of the grass you nee
- 3. Turn on the power source, and make the machine idle for a few minutes. Then take the appropriate amount of grass into feeding port evenly there is no abnormal situation. Too much grass will cause over-load stop, otherwise, it will affect the cutting efficiency.
- When stopping, let the machine idle for two minutes. Blow the dust and weeds inside grass cutter animal, then turn off the machine, and adjust the handle to the “stop” position.
- When using diesel engine or tractor power, the diesel engine throttle should be properly controlled (usually use the middle throttle). If it is too large, it will cause the machine to over speed. Otherwise, it affects the working efficiency.
- The gearbox handle of this machine has 3 gear positions, push the handle to the (in) position during normal use. When the feeding is too blocked, push the handle to the “stop” position, and wait for a moment and then push To the “return” position. You shall reduce the feeding amount and re-work. When the operation stops, the handle is adjusted to the “stop” position; when the handle is pushed, the pushing force should be appropriate.
FAQ of grass cutting
1.Q: How many blades inside the machine? and the shape of blade?,xnxx in yoga
erotic sec,There are 6 pieces of blades.
- What’s the shape of blades?
They look like rectangle.,sex russian
3. What is the chopping size of final grass?,lets jerk
game hot sex,5mm,11mm and 15mm.
4. Do you have any other machines with different capacities?,xnxx hp
Yes, we have. The capacity of this chaff cutter machine is 1.5t/h. we also have 2t/h-10t/h machines.,boobs dikhao
- What the crushed grass can be used for?
69 nude,Crushed grass can be used to feed animals.