Table of Contents
Corn harvester is used to harvest corn from fields, and we usually divide it into two types including hand-operated corn cutter or tractor-driven corn cutter. They bear different capacities and structures, but the harvesting effect is perfect.
The corn harvester with straw returning should cut as far as possible after the corn is ripened for 3 to 5 days. In this way, the kernel of corn is full and the water content of them is low that is good for peeling the corn husk. In addition, yellow straw with low water content can be effectively crushed, reducing labor time.
Technical parameter of corn cutter
|Max cutting height||2120mm||/|
|Minimum distance from ground||150mm||200mm|
|Fuel consumption||Less 25kg/hm2||/|
|Peeling roller||Spiral rubber roller||Spiral rubber roller|
|Peeling device||8 peeling roller||4 peeling roller|
|width of straw returning to the field||930mm||/|
|Wheel distance||Front wheel(1200mm) |
Advantage of corn cutter
- There are 8 peeling rollers inside harvesting corn machine that can remove the skin of corn after harvesting, saving labor time.
- Corn harvesting has big size, and it is more stable than other types during operation.
- It integrates picking, conveying, peeling, packing and straw crushing as a whole.
- The loss rate of corn is pretty low: less than 3%.
- There is a cab on the upper of the machine, and people can sit in it and run machine easily.
Structure of corn cutter
- Corn cutting part Winch assembly 3. Rack assembly 4. Operating system 5. Covering 6. Lifting parts 7. Electrical system 8. Safety marking 9. Peeling machine 10. Transmission system 11. Grain box assembly 12. Hydraulic system
Maintenance of several important parts of corn cutter
www-xxx-cex-com,The temperature of the muffler on the corn cutter is quite high. The user must clean the debris around the engine exhaust pipe according to the situation, and keep the engine, especially the exhaust pipe clean.
- Main clutch
(1) the operator should always check the working status and performance of the main clutch, and it should be repaired or adjusted in time if there are any impurities on it.,porn-me
purplepornstar,(2) Regular lubrication should be carried out.
(3) When disassembling and assembling, you shall be sure to properly assemble the separation bearing and separation bearing cover as required.,nudesex
(4) It is necessary to ensure the correct position of the rear dynamic pressure plate and fixed pressure plate to prevent the adjustment of the clutch clearance due to the collision between the rear movable claw guide sleeve and the fixed plate separation spring guide pin.,indian-best-xxx
desi-sex-big,(5) It is necessary to check the complete condition of the clutch connecting pin, the connecting rod and the split pin in time. If the gap between the pin and the hole is too wide, the split pin should be replaced or replenished in time to prevent accidents.
3.Straw chopping device,daddy-fuck
wild-porns,(1) tighten the power fixing bolts of corn cutter.
sis-pornhub,(2) The movable blades should be replaced in time after wear due to long-term use, but you shall pay attention to the direction of the blades when replacing.
(3) Check the working condition of the moving shaft driving chain in time, and when the chain is lost or deformed. It is necessary to fill the joint or replace the chain in time, ensuring that the sprocket circuit is correct.,sex-free-games
- Steering bridge assembly
big-tit-clips,Check the fixing condition of the steering rod to ensure the fixing is reliable.
porn-hup.com,Pay attention to the fixing condition of the locking nut of the steering cylinder piston rod, ensure the nut is tightened reliably. Operator shall check the tightening depth of the piston stud, which may cause accident if it is loose.
- Hydraulic system
(1) Check the sealing of hydraulic pipelines. There shall be no oil leakage between joints and valve joints.,indian-bf-gf-sex
(2) The pressure of the reversing valve has been set before delivery, and it is forbidden for the user to blindly increase the pressure to prevent the pipe valve from being broken after being subjected to high pressure.,postman-porn
(3)The same type of hydraulic oil must be used from beginning to end to prevent the chemical reaction caused by the mixed oil.,sex-xxx-mom
slow-fuck-video,(4) Hydraulic oil must pass the oil filter to prevent dirt from entering the system, causing damage to the hydraulic components.
(5) Hydraulic valves of corn cutter must be carried out by professional maintenance personnel.,free-sexyindians
Common faults and related solution of corn cutter
kimmy-olsen,(1) Straw blockage
Reason: The position of the picking board is not suitable (the gap is too close), and the transmission triangle belt is too loose.,sex-school-video
desiremoviehd,Solution: Adjust the clearance of the picking plate to the appropriate size. Due to the different thickness of the straw, the tension of the transmission belt is adjusted between 20-50mm.
(2) The smashed straw is too long,bridgette-b
double-anal,Reason: The clearance of the movable knife is too long, and the blade of it is not sharp.
Solution: Adjust the clearance between the fixed knife and the movable knife ranging from 0.3-1.5mm.,swinger-sex-video
celebzihad,(3) The peeling effect is not good
baal-veer-886,Reason: The peeling rubber roller is seriously worn, slipping from the driven rubber roller.
nude-prison,Solution: change the pressure of stripping roller by adjusting the bolts or replace the stripping roller.
(4) Common faults in the gearbox,top-sex-site-list
pron-mobie,Phenomenon: The gearbox has abnormal noise, oil leakage or overheating.
Reason: Gear or bearing is worn. Installation direction of oil seal is wrong or aging. Side gap is too close and there are little lubricant oil.,indian-teens-tits
Solution: 1. Adjust the gear or bearing installation clearance.,brezzers-xxx
- Replace damaged parts.
- Reinstall or replace the oil seal.
- Tighten the bolts and adjust the oil to the appropriate height.
It is a small size corn harvesting machine and suitable for individual farmers. The machine is easy to operate in the field, and one person can finish all the processes. What’s more, due to the new design of a small container at the side of the machine, corn can directly fall down it after harvesting. In addition, this cutting corn machine also can crush the corn straw into pieces, increasing the nutrition of the soil.
Technical parameter of corn cutter
|Name||Corn Harvester Machine|
|Type||Hand manual operation|
|Transmission mode||Triangle belt|
|Connection mode||Direct connection|
|The adjustable angle of handles||180/ 360|
|Number of blades||24/32|
|Tilling Depth||More than 100mm|
The detailed structure of corn cutter
1.flameout switch 2.Accelerator 3.walking clutch
4.Armrest height adjustment grip 5.fuel tank 6. engine oil filler
7.forward I, II, reverse gear, shift gear 8.tire 9.travel gearbox
10. opening rod of corn storage tank 11. corn container
12.harvesting gearbox fuel filler 13.harvesting gearbox 14.shift lever of high and low gear 15.muffler 16.air filter 17.armrest grip
18.armrest frame 19.oil filling inlet of walking gearbox 20.corn harvest clutch
21. filter oil cup 22.hand-operated handle
Advantage of corn cutter
- Corn harvester price is low and almost all farmers can afford it.
- It just needs one person to push forward, which is easy to operate.
- The angle of the two handles is adjustable.
- It is small in size and light in weight and can apply to many fields such as plan, hill, mountains, etc.
Type three：3 row corn harvester
hintai,It is 3 row corn harvester machine with capacity 1-1.5acre/h. Compared with the first two types, it needs a higher engine, 103kw.Applicable range of row spacing is 650mm, and cutting width is 1825mm. Corn cutter can run with high working efficiency, which makes sure that the loss rate is less than 4% and the corn breakage rate is less than1.0%. Honestly, there is a little impurity in the final corns, and the impurity content is less than 1.5%. All in all, it is a good tools for farmers.
|Structure type||Self-propelled wheel|
|Driving mode||2-wheel drive|
|Engine speed||2300 r/min|
|Harvesting lines||3 rows|
|Applicable range of row spacing||650mm|
|Peeling Roller Material||Iron roller & Rubber roller|
|Minimum ground clearance||290 mm|
|Unit area fuel consumption||≤ 20 L/hectare|
|Total loss rate||≤ 4%|
|Grain breakage rate||≤ 1.0%|
|Content of impurities||≤ 1.5%|
|Peeling rate||≥ 85%|
|Stubble height||≤ 50mm|
|Straw comminution rate||≥ 85%|
Type four：4 rows corn cutter machine
4YZP-3A self-propelled has low noise and flexible operation and it can open the cutting path, and the cutting roll can realize cross-cutting, oblique cutting and non-line harvesting. With high efficiency, it is equipped with 140 horsepower engine, so it is energy-saving and environmental protection. The 16-roll peeler has a high peeling rate and high quality of straw crushing. With hydraulic steering, it is hydraulic unloading and waste recovery.,strem-sex-com
|Harvesting lines||3 rows|
|Applicable range of row spacing||450-650mm|
|Amount of Peeling Roller||16 pcs|
|Width of Returning Machine||1700mm|
|Cutting center distance||550mm|
|Harvesting lines||4 rows|
|Applicable range of row spacing||500-600mm|
Successful case of corn cutter
For type onenangi-videos
For type twoanime-pron-videos
FAQ of corn cutter
- How many rows can be harvested?
- What is the loss rate?
- What is the minimum distance from the ground?
- Can this harvester peel the skin of corn?
No, it can’t,xxx-sex-vodio
- Where is the corn straw after harvesting?
- What is the stubble height?
It can be adjusted, but the minimum height is 10cm.,xxxx-sex-vidoe
- How many crushing blades?
andra-aunty-fuck,There are 10 crushing blades in the bottom.
redtube-gay-sex,5. Are the blades easy broken parts? How long can I use it?
Yes, the blades are easy broke parts, especially meeting with big stone or other very hard obstacles. Usually, it can be used for one year.,jaan-movie-com
video-girl-fuck,We send you an extra 1 unit (10pcs) for free with the corn harvester when delivery.
6. What power does this corn harvester use?,pornhub-vidio
bigboob-nude,188F gasoline engine or 188F air cooling diesel engine.
7. Will there be some corns that cannot be harvested?,errotic-fuck
sammyboyforum,With the practice experience, the corn harvesting rate is more than 98%.
- How many corns can be collected in the container at the side of the machine?
Depends on the corn size, usually, it can collect 30-50pcs.,desi-b-grade
masaaladesi,9. Can it harvester sweet corn?
radhika-panditsex,Yes, it can harvest sweet corn.
curvy-milfs,10. How many sets can be loaded in 20GP and 40HQ?
20GP can load 26 sets, 40HQ can load 54 sets.,boobpress
natalie-knight,11. What is the delivery time for 100 sets of corn harvester?
nude-hot-porn,Usually, it takes one week.
hotshortfilms,12. Are the cutting width and height adjustable？
13. Can the corn skin be removed during operation?,porn-vedio-in-hdalex-de-la-flor
erotic-sex-nude,14. How many rows can it cut?
Just one row.,1337x.io-torrent